NextGen NP-F 9200HT is a thermosetting High Service Temperature Fusion Bonded Epoxy Powder designed for both as stand-alone FBE coatings and also as an anti-corrosion primary layer in a multi-layer pipe coating system.

NP-F 9200HT is normally applied in the temperature range 230°C to 250°C up to 500 microns as a stand-alone anti-corrosion coating, higher thickness can be applied for concrete weight coatings. It can be applied at lower temperatures 205°C to 230°C when used as primer in three-layer systems.

NP-F 9200HT high-temperature FBE differ from normal FBE only in its performance in high-temperature conditions; however, the remaining properties like gel time, cure schedule, impact, and flexibility remain the same. NP-F 9200HT coatings give excellent CD test results and in hot water adhesion test, it retains maximum adhesion to the steel substrate as compared to the normal FBE coatings. The application parameters, transportation, and installations are also the same as for as standalone coatings are concerned so there are no special precautions for High Tg FBE coatings. However, the damage risk is reduced in multilayer system.

NextGen NP-F 9200 series available in following types:

• NP-F 9200HT – For stand-alone & multi layer coatings with Tg 120°C – 130°C. (Technical Data)
• NP-F 9201HT – For stand-alone & multi layer coatings with Tg 140°C – 150°C.
• NP-F 9202HT – For Multi layer coatings with Tg 150°C – 160°C.

For more specifications, please contact with our sales representatives.