NextGen NP-F9600IC is a thermosetting Fusion Bonded Epoxy Powder designed for lining the internal surface of line pipes, tubes and fittings used for oil, gas, and water transportation. It can also be used without primer on nonproduction tubing such as valves and pumps. When applied over a Phenolic primer, it resists wastewater, corrosive soils, hydrocarbons and seawater. The powder can be applied electrostatically or by air-spray equipment

NP-F9600IC is normally applied on the preheated pipe in the temperature range 170°C to 200°C, and then Post Cure 200°C to 232°C for a minimum of 30 minutes depending upon the wall thickness and diameter of the line pipe.

Operating Temperature: NP-F9600IC is suitable for operation at continuous temperatures up to 100°C.

NextGen NP-F9600IC series is available in the  following types:

• NP-F9600IC – Standard FBE for internal pipeline coatings with and without Phenolic Primer.
• NP-F9601IC – Extra flow & chemical resistant internal pipeline coatings.
• NP-F9602IC – High Tg internal pipeline coatings for high service temperature conditions.